Acoustic Insulation

SeaRox Acoustic Foil

Name: SeaRox Acoustic Foil
Brand: Rockwool

SeaRox Acoustic Foil is a very strong and durable 19 μ thin film resistance to oil/oil mist, water and most other substances expected to be found in the environment of the engine room and can withstand temperature extremes from –70°C to 150°C. The film contains no plasticizers.

Download Datasheet Contact

Back

SeaRox Acoustic Foil forms part of the optimal system for soundabsorption specifically designed for engine rooms, cargo pumprooms and similar applications. By using the SeaRox Acoustic Foil system, the noise reduction properties of the ROCKWOOL material will remain.The system (mineral wool insulation, film and covered by aperforated steel plate) has been tested and approved for lowflame spread. See the our datasheet or product brochure for further information.The film is supplied in rolls of 200 x 1 m.

Firesafe

The ROCKWOOL Technical Insulation products are based on stone wool, which cannot burn and which can stand temperatures up to 1000 degrees C without melting. Thus ROCKWOOL stone wool provides the best guarantee for an effective fire protection on board ships and offshore platforms.

Learn more

Acoustic

What is sound? In physical terms, sound is the mechanical vibration of a gaseous, liquid or solid elastic medium. Sound is a form of mechanical energy. It is produced, when particles oscillate around their equilibrium position.

Learn more

Comfort

The requirements of the indoor climate and comfort have become more stringent during the recent years. The insulation constitutes an important factor of this, as it ensures obtaining that the correct temperature is obtained.

Learn more

Thermal

To guarantee a correct process cycle, the condition of the media within the pipes must remain within the set limitations (e.g. temperature, viscosity, pressure, etc.). In addition to the correct isometric construction and fastening of the piping, the piping insulation also has an important function. It must ensure that the heat losses are effectively reduced and that the installation continues to operate economically and functionally on a permanent basis. This is the only way to guarantee the maximum efficiency of the process cycle throughout the design service life without losses as a result of faults.

Learn more

Outfitting

To obtain a good comfort, a good noise reduction is required between the individual decks. To prevent noise – particularly impact sound and structure borne noise– from travelling from one cabin to another you must use an insulation solution which has the necessary rigidity, elasticity and noise reduction/absorption.

Learn more

Facings

There are many reasons for choosing insulation products with facings. It is generally done to obtain a vapour barrier, which prevents formation of condensation on the cold side of a construction.

Learn more

Back